Midea MAW08AV1QWT User Manual page 16

1. Prepare the Bracket – Install Video Time 1:48
Remove the top foam insert containing the bracket and hardware from the carton.
Fig. 2
Adjust
A. Measure the inside opening of your window sill and use that distance to set the total
width of the bracket Extension Arms. To adjust the extension arms, press the Spring
Push Pin, slide the Left Extension Arm out and then install the Right Extension Arm.
Use the short arm for 22-26" windows, and the long arm for 26-36" windows.
B. Apply Bracket Sealing Foam strips to the bottom of the bracket as shown. Repeat
on both sides.
2. Prepare the Window – Install Video Time 1:58
Lower sash must open sufficiently to allow a clear vertical opening of 13.75 inches.
Side louvers and the rear of the AC must have clear air space to allow enough
airflow through the condenser for heat removal. The rear of the unit must be
outdoors, not inside a building or garage. Find the center of your window and
lightly mark with a pencil.
Page 16
Center
Apply Bracket
Sealing Foam
Fig. 3
Adjust