Midea MAW08AV1QWT User Manual page 10

Air Conditioner Features
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the control panel, remote control, smart phone app or voice control.
2 3 4
1. ON/OFF Button
Press ON/OFF button to turn unit on or
off.
2. CONNECT Button
When connecting your air conditioner
to WiFi, press the CONNECT button
for 3 seconds to initiate the WiFi
connection mode. The display shows
'AP' to indicate the unit is in the WiFi
connection mode. Refer to the WiFi
section for further instructions.
If connection (router) is successful
within 8 minutes, the unit will exit WiFi
connection mode automatically and the
CONNECT indicator illuminates.
If connection failed within 8 minutes,
the unit exits WiFi connection mode
automatically and the CONNECT
indicator does not illuminate.
After WiFi connection is successful,
you can press and hold CONNECT and
DOWN ( ) buttons at the same time
for 3 seconds to turn off WiFi function
and the LED DISPLAY shows 'OF' for 3
seconds, press CONNECT and UP (
buttons at the same time to turn on WiFi
function and the LED DISPLAY shows
'On' for 3 seconds.
Page 10
5 6
3. Timer Button: Auto Start/Stop Feature
• When the unit is on, press the Timer
• When the unit is off, press the Timer
• When the time of TIMER ON is displayed,
• Press or hold the UP (
• The selected time will register in 5
• Turning the unit ON or OFF at any time
)
NOTICE
To cancel timer operation, press and
hold the timer button for 2 seconds until
the beep/buzzer is heard.
7
button. The "Timer off" LED indicator
light will illuminate indicating the Auto
stop feature has been activated.
button. The "Timer on" LED indicator
light will illuminate indicating the Auto
start feature has been activated.
press the Timer button again. The TIMER
OFF indicator light illuminates. It indicates
the Auto Stop program has initiated.
button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour
increments up to 24 hours. The control will
count down the time remaining until start.
seconds, and the system will automatically
revert back to display the previous
temperature setting or room temperature
when the unit is on. (when the unit is off,
there is no display.)
or adjusting the timer setting to 0.0 will
cancel the Auto Start/Stop timed program.
8 9 1
1 0
) or DOWN ( )