5. Turn the SETTING knob to "0" position to switch off the heater.
Unplug the appliance only when the heater/fan is completely
stopped..
Fan operation
To use the unit as a cooling air circulator without heat, turn the
SETTING knob to
setting.
If your Heater fails to operate
• Be sure it is plugged in and that the electrical outlet is working.
• Check for any obstruction. If you find an obstruction, turn the
heater OFF. Unplug the heater and wait at least ten minutes for
cool-down. Carefully remove the obstruction. Re-plug the
heater in and restart it as described in Utilization section.
• If you still notice the same defect, unplug the heater and then
detach the plug from the outlet and have the appliance checked
by service personnel only.
and the TEMPERATURE knob to its highest
Operation
17