Before Rst Use; Setting Up The Device; Operation; Installing The Device - Easy@Home BL-K16-J User Manual

Before first use

Before rst use

Setting up the device

1. Remove the cable tie on the power
cable (Fig. A).
2
2. Place the device
(Fig. A).
3. Plug the power cable into a socket.
The device is set up.

Operation

CAUTION!
Danger of burns!
Careless handling of the device can cause burns.
- When using the device or if it is still hot from use, do not touch
any part of the device other than the controls.
- Allow the device to completely cool down before moving or
cleaning it.

Installing the device

The heater shall be installed and used according to the safe
standard.
To avoid all dangers, follow the safety instructions.
14
on a level surface
1
A
1
2