General Safety Warning - Easy@Home BL-K16-J User Manual

General Safety Warning:

1. The heater should be placed on flat work surface. You must not place it
precipitantly or tipsily.
2. Use only the voltage specified on the rating plate of the heater.
3. The heater must not be located immediately below a socket-outlet.
4. Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the
appliance overheat and become a fire risk.
5. Do not block air inlets or outlets in any manner. Check the openings from time to
time for accumulated dust.
6. Do not place the appliance close to a radiant heat source.
7. Do not operate in areas where gasoline, paint or other flammable liquids are used
or stored.
8. Do not use the appliance to dry clothes.
9. Do not insert or allow foreign objects to enter any ventilation or exhaust opening,
as this may cause an electric shock, fire or damage to the appliance.
10. Do not operate any appliance with a damaged cord or after the appliance
malfunctions or has been dropped or damaged in any manner. Return to a
qualified electrical person for examination, electrical or mechanical adjustment,
service or repair.
11. This appliance is intended for household use only and not for commercial or
industrial use.
12. Use this appliance only as described in this manual. Any other use is not
recommended by the manufacturer and may cause fire, electric shock or injury.
13. The most common cause of overheating is deposits of dust or fluff in the
appliance. Ensure these deposits are removed regularly by unplugging the
appliance and vacuum cleaning air vent.
14. Do not use abrasive cleaning products on this appliance. Clean with a damp cloth
(hot wet) rinsed in hot soapy water only. Always unconnected from the mains
supply before cleaning.
15. The appliance heats up slightly when in use. To avoid burns, do not let bare skin
touch hot surfaces.
16. Never use with an extension cord or relocatable power tap (outlet/powerstrip).
17. Do not allow cord to come in contact with heated surfaces during operation.
18. If the supply cord is damaged, it must be replaced by the manufacturer its service
agent or similarly qualified persons in order to avoid a hazard.
19. If the heater needs repair, please ask for special person or our company
authorized maintenance department.
20. Do not use this appliance outdoors, or on wet surfaces.
General Safety Warning
11