Operation
C
Control
TEMPERATURE Knob
1
Power On Light Indicator
2
Stabler Base
3
Air intake at the rear
4
Integrated Handle at
5
the rear
SETTING Knob
6
WARNING!
To avoid overheating, do not cover
Utilization:
1. Connect the appliance to safety socket.
2. Turn the SETTING knob to either "Fan", "Heat (1000W)" or
"Heat (1500W)" position per need; or turn it to "Oscillating fan",
"Oscillating heat (1000W)" or "Oscillating heat (1500W)" position if
oscillation function is required..
3. For Heater operation turn the TEMPERATURE Knob in the direction
of clockwise until reaching the maximum temperature.
4. Once the desired room temperature is reached, slowly turn the
TEMPERATURE Knob in the direction of anticlockwise to reduce
hot air out in case necessary.
16
Functions
Low to high temperature.
Indicate power On.
Stable the Heater.
Cool air into the heater.
Use the carry handle to transport the device.
Set for Off - Fan - Heat (1000W) - Heat (1500W) -
Off - Oscillating fan - Oscillating heat (1000W) -
Oscillating heat (1500W).