Wiring - Kicker KPX Series Owner's Manual

Wiring

Click Here for Amplifier Install Kits
Model External Fuse (sold separately) Power/Ground Wire
KPX500.1 1 x 60 Ampere
KICKER will provide a three-year warranty with all
KPX-Series Amplifier purchases paired with a qualifying
KICKER Installation Kit*.
This extends the standard warranty by an additional year. Amplifier and Kit
must be purchased from an Authorized KICKER Dealer.
Using poor-quality, under-spec wiring kits will impede KPX amplifier performance.
A superior-quality KICKER installation Kit is guaranteed to extend the life of KPX amplifiers.
The new extended warranty applies only to KICKER amplifiers and accessories sold to consumers by Authorized
KICKER Dealers in the United States of America or its possessions. It also only applies to the original purchaser of
KICKER amplifiers and accessories. One warranty extension per amplifier is allowed regardless of the number of amplifier
installation kits purchased. This program does not apply to "B"-stock product or factory-refurbished product.
This offer is for a limited time, so see your local Authorized KICKER Dealer soon for details.
*U.S.A. Only | EE.UU. solamente | Nur USA | Les USA Seulement
Disconnect the vehicle's battery to avoid an
electrical short. A good ground connection
is important. If the KPX is mounted in the
front fairing of a motorcycle, it will be best
to extend the ground wire all the way to
the battery. Make the ground wire short,
24" (60cm) or less and, if not conneted
to the battery, connect it to a paint-and-
corrosion-free, solid metal area of the
vehicle's chassis. Adding an additional
ground wire of this same gauge (or larger)
between the battery's negative post and
the vehicle chassis is recommended. Keep
the audio signal cable away from factory
wiring harnesses and other power wiring. If
you need to cross this wiring, cross it at a
90 degree angle. Install a fuse at the blue
+12V constant wire. Fuse installation should
English
8 Gauge
KICKER Wiring Kit
KMPK8, PK8, CK8
6