Kicker KX100.2 Owner's Manual
  1. Manuals
  2. Brands
  3. Kicker Manuals
  4. Amplifier
  5. KX100.2
  6. Owner's manual

Kicker KX100.2 Owner's Manual

Kicker amplifier owner's manual
Hide thumbs Also See for KX100.2:
Table of Contents

Advertisement

Quick Links

See also: Technical Manual

Advertisement

Table of Contents
loading

Related Manuals for Kicker KX100.2

Summary of Contents for Kicker KX100.2

  • Page 2 Amplifier Serial Number: Two Channel Model: You have just purchased the latest in amplifier technology to carry the famous KICKER name. Your KICKER KX series amplifier is designed and built to give you years of powerful and trouble-free performance. This installation...
  • Page 3 Injection Molded EndKaps custom, removable covers to protect and hide all your wiring connections to the amplifier. Can be prepped and painted any custom color you choose. Two Year Warranty When purchased from an Authorized KICKER dealer. KX Amplifier...
  • Page 4 Mounting When selecting a location to mount your Kicker amplifier be sure it is structurally sound and that there are no items behind the area where the screws will be driven that could be damaged. Check for wire harnesses, brake lines, fuel lines, gas tanks, etc.
  • Page 5 90 degree angle to reduce the potential of alternator noise and electrical interference. Note: To get the best performance from your new Kicker Amplifier, we recommend using genuine Kicker Accessories and Wiring.

  • Page 6: Bridged Operation (Mono)

    Speakers are rated at four ohms (some DC Resistances may be as low as 3 ohms) and work with any amplifier designed to oper- ate at a four ohm load. If you want to use two Kicker Coaxial or Component Speakers on a single channel of your amplifier wire the speakers in series.

  • Page 7: Gain Control

    Navigation Your Kicker amplifier has two rotary controls and one switch on the end panel. These controls ensure the reliability and performance of the amplifier, so they need to be set correctly. CROSSOVER SWITCH NEVER CHANGE THE CROSSOVER “OFF/HI/LOW” SWITCH...

  • Page 8: Troubleshooting

    There are two LEDs on the end panel of your Kicker KX series amplifier, one green and one red. When the green LED is lit this indicates the amplifier is turned on and no trouble exists. If the green LED turns off and the red LED is lit, this indicates that the protection circuitry (SORT) is engaged.
  • Page 9 NOTE: All specifications and performance figures are subject to change. Please visit the support section at www.kicker.com for the most current information. Please Note: Modern high performance speakers have a lower DC Resistance than what used to be available.
  • Page 10 @ 2Ω Stereo, < 1% THD+N @ 4Ω Mono, < 1% THD+N @ 12.5V, 4Ω Stereo, 0.085% THD+N @ 2Ω Stereo, 0.5% THD+N @ 4Ω Mono, 0.5% THD+N Length with EndKaps: Specifications of KX100.2 KX100.2 Height: Width: 2 x 35 Frequency Response:...

  • Page 11: What Is Not Covered

    ELECTRONICS LIMITED WARRANTY Kicker warrants this product to be free from defects in material and workmanship under normal use for a period of THREE (3) MONTHS from date of original purchase with receipt. When purchased from a Authorized KICKER Dealer it is warranted for TWO (2) YEARS from date of original purchase with receipt.

Table of Contents