Advertisement
1
Remove 4 screws at two sides of bottom panel, then install the stacking bracket.
4 Screws
Install your dryer with stacking bracket on the top of the front load washing machine.
2
Drill two holes on both sides of top panel of washing machine with 2.9mm diameter drill.
Detailed drill position as shown on the stacking bracket. Only use the screws supplied in
the stacking bracket. Fix the stacking bracket on the top panel of washing machine.
Inverted wall mounting
Your dryer has been designed to be inverted and mounted on the wall above a
washer or tub. A wall mounting kit must be used. Inverting allows access to the
dry control panel.
Tools and parts required:
■
Drill and 3mm bit
■
Phillips head screwdriver
Wall mounting kit includes:
■
x
2
Plastic spacers
■
x
2
Wall hanging brackets
■
x
2
Hanging hooks
■
x
4
Wood screws
■
x
6
Screws for hanging hooks
and plastic spacers
12
Stacking bracket
Min. 50mm clearance
Min. 50mm clearance
Advertisement
