Advertisement
PROBLEM
POSSIBLE CAUSES
Turning the knob
Fault with household power
does not turn
supply.
on the dryer.
Dryer could be displaying a user
Pressing
warning or fault code.
'Start / Pause'
does not start the
'Delay' function is set.
drying cycle.
Dryer keeps
The 'Anti-crease' option has
stopping and
been selected.
starting.
Dryer stops
Power failure.
working mid-cycle.
Dryer has been paused.
Dryer door is open.
Dryer is taking too
Drying cycle selected not
long/results were
appropriate for the load.
not satisfactory.
Selected drying temp, not
appropriate for the load.
Dryer overloaded for the cycle.
Lint filter is blocked.
Load overly wet at the start of
cycle.
Clothes getting too
Cycle selected not appropriate
hot or damaged.
for the load.
Items removed from dryer before
the end of cycle cool down had
finished.
11
WHAT TO DO
Try plugging in and turning on another
electrical appliance.
Refer to Section 10.
Refer to Section 4"Control panel" for
more information.
Refer to Section 4"Control panel" for
more information.
Turn the knob and restart the desired
cycle.
Press the 'Start / Pause' button to restart
the cycle.
Ensure the door is firmly shut.
Select an appropriate cycle for the load.
Select a higher drying temp.
Some cycles have a lower max. load size.
Try dividing the load in half and dry
half at a time.
Clean the lint filter.
Remove more water from the load before
placing it in the dryer, eg select a faster
spin on your washer, a speed appropriate
for your load.
Ensure the cycle selected is appropriate
for items in the load.
Removing items before cool down may
damage clothing if it is not spread out and
exposed to cooler air once removed from
the dryer.
Advertisement
