Advertisement
8
Your dryer is capable of diagnosing a number of its own problems. It will sound a continuous series
of beeps and display a user prompt when it has a problem that you can correct yourself. To stop
the beeps sounding, touch any button on the control panel. Do not try to continue your drying cycle
once you stop the noise. You must address the problem the dryer is alerting you to.
Check the below table before you call for service.
PROBLEM
Keylock is
activated
The door is not
closed
Dryer has been
paused
Once you have addressed the issue the user prompt was alerting you to, try using your dryer as per
usual. If the issue persists, call your Haier trained and supported service technician.
9
DISPLAYED AS
WHAT TO DO
Touch and hold the 'Key Lock' button for 3 seconds
to
Close the door fully and press 'Start / Pause'.
Try opening and closing the door again.
Reposition the load, make sure the load is
correctly in the drum and that protruding
items are not stopping the door
Press the 'Start / Pause' to resume the cycle.
deactivate the Keylock.
from closing.
Advertisement
