Table of Contents
Advertisement
Chapter 5: Maintenance
5.5.5 DPF REGENERATION LAMP AND SWITCH
1.
The HEST (High Exhaust System Temperature) Lamp notifies the operator when
hot exhaust gas is being discharged from the engine during DPF regeneration.
Be sure to keep the area around the exhaust manifold free of flammable
materials.
2. The DPF Regeneration Lamp turns on either during regeneration or when
regeneration is needed and turns off during active regeneration while operating
if the soot level is less than 100%. The lamp appears as shown on the right when
the operator disables regeneration.
95
Figure 50 - HEST lamp
Figure 51 - DPF regeneration lamp
Redwood Global Ltd - ST8D
Operator and Maintenance Manual
14-00-003 v3.1
Advertisement
Table of Contents
Need help?
Do you have a question about the ST8D55 and is the answer not in the manual?