Entrust nShield Edge Installation Manual page 29

6. Unless needed for a subsequent installation, remove the user
:
ncsnmpd
a. Open the file
b. Remove the line that begins with the form:
nfast:x:n
In this line, n is an integer.
c. Open the file
d. Remove the line that begins with the form:
nfast:x:...
e. If it exists, remove the line that begins with the form:
ncsnmpd:x:...
If required, you can safely remove the module after shutting down all connected hardware.
N-018201-X
with a text editor.
/etc/group
with a text editor.
/etc/passwd
nShield® Edge-Installation Guide
Appendix A: Uninstalling existing software
and, if it exists, the user
nfast
30