Link MC5 User Manual page 41

Configuring the MCs
Table 2-7. ANSI Setup Menu Parameters (cont.)
Char Mode
Multinational
National
Char Set
Multinational
ISO Latin-1
Keys
Typewriter
VT100 ID
VT100
VT101
VT102
VT220
Send
All
Eraseable
Print
Multinational
National
Line Drawing
MCs User's Guide
The supplemental character set:
Allows the terminal to display characters from the 8-bit
extended ASCII set when in VT220 mode.
Invokes a local country set using international, 7-bit
characters for the selected keyboard.
The supplemental character set is:
Multinational.
ISO 8859-1, Latin Alphabet #1.
For some international ANSI keyboards, certain keys
send codes as:
The standard character shown on the left half of the
keycap.
In answer to a host request, the terminal will identify
itselt'as a:
VT100 terminal.
VT101 terminal.
VT102 terminal.
VT220 terminal.
During block transmissions:
Eraseable and non-eraseable data is sent to the host.
Only eraseable data is sent.
During a print page or print line operation:
Escape sequences and control codes are sent,
allowing printing of ASCII, line-drawing.
Escape sequences are not sent, and non-ASCII
characters are replaced with ASCII underline
characters.
Escape sequences and control codes are sent,
allowing printing of ASCII and line-drawing graphics
characters and line attributes
?-?5