Link MC5 User Manual page 25

Configuring the MCs
Table 2-2. General Setup Menu Parameters (cont.)
Bell Sound
Off
1
2
3
Block Terminator
US/CR
CRLF/ETX
Send ACK
Off
On
Monitor Mode
Off
On
The sound of the MC5's bell is:
Turned off.
A low-pitched beep.
A medium-pitched beep.
A high-pitched beep
When the MC5 sends a block of data to the host, the:
Line terminator is an ASCII US character; the block
terminator is an ASCII CR character.
Line terminators are ASCII CR and LF (line feed)
characters; the block terminator is an ASCII ETX
character.
After executing certain commands
3 ,
the terminal:
Sends no acknowledgment.
Sends an ASCII ACK character to the host port when
the operation is complete.
Executes escape sequences and control codes.
Displays symbols for escape sequences and control
codes without acting on them.
3
For example, commands to reconfigure the serial ports, load character sets, or print a
page.
MCs User's Guide
2-9