Link MC5 User Manual page 38

Configuring the MCs
2-22
Table 2-6. Keyboard Setup Menu Parameters (cont.)
Keycode
1
ASCII
Scan
WP Keyboard Mode
Off
On
Lock Keyboard
Disable
Enable
Language
us
UK
Norwegian
Norwegian/Danish
Danish
German
French
Spanish
Swedish/Finnish
Swedish
Flemish
Finnish
French/Canadian
French/Belgian
Belgian
Italian
Swiss(French)
Swiss(German)
Dutch
When keys-are pressed, the terminal sends:
Standard ASCII key codes.
PC scan codes (up/down).
Enables WordPerfect when running on a host under
Unix:
WordPerfect key codes disabled.
WordPerfect key codes enabled.
When set to:
Prevents the host from disabling the keyboard.
Allows the host to disable (lock) the keyboard.
Sets the keyboard language to match the keycap set:
ANSI, ASCII, EPC.
ANSI, ASCII, IEPC.
ANSI, IEPC.
ASCII.
ANSI, IEPC.
ANSI, ASCII, IEPC.
ASCII, IEPC.
ANSI, ASCII, IEPC.
ASCII, IEPC.
ANSI.
ANSI.
ANSI.
ANSI, IEPC.
ANSI.
IEPC.
ANSI, ASCII, IEPC.
ANSI, ASCII, IEPC.
ANSI, ASCII, IEPC.
ANSI, ASCII, IEPC.
1
If the Comm Mode parameter is set to block, half block, or local, the terminal sends
ASCII key codes regardless of this parameter's setting. In full-duplex mode the MC5
automatically changes the setting to scan when the PC Term emulation is selected. To
select ASCII, you must already be in PC Term when you enter setup (exit and reenter setup
if necessary).
MCs User's Guide