Remote Control; Operation - HOMCOM 824-076V90 Manual

REMOTE CONTROL

1. Included a button cell battery (the type of battery CR2025). Storage the remote control
at the back of fan.
2. The Remote Control Power button is labeled as such(Fig 3). All the functions
performed with the Remote Control work identically to the Manual Controls.

OPERATION

The FAN may be operated by the manual controls located on the FAN (Fig 4) or by your
remote control. (Fig 3)
1.Place the FAN on a stable flat surface. Plug the cord set into a 220-240V~ electrical
outlet.
2. POWER : Turn the FAN on by pressing the 'POWER' button; Turn the FAN off by
pressing the 'POWER' button again.
3. SPEED : You can adjust the fan speed to the desired level: low, medium, or high
by pressing 'SPEED'. The speed setting is displayed on the LED display. (Fig 5)
4. MODE
: Pressing the 'MODE' button will set the FAN into NORMAL, NATURAL,
SLEEP and CHILD mode.
NORMAL Mode
-
NATURAL Mode
-
speed(5s)→medium speed(5s), it works as per this recycle.
- SLEEP Mode
30 mins, then transfer to medium speed at 30 mins and transfer to low speed until fan
stop working. 2） If you set the mode at medium speed, fan will work at medium speed
at 30 mins, then transfer to low speed until fan stop working. 3） If you set the mode at
low speed, fan will work at low speed until fan stop working. The LED display will turn off
if you don't control the fan in 30 seconds, touch any button to turn on the display.
CHILD Mode
-
start. And it will work at high speed at 15 minutes, transfer to medium speed at 15
minutes, then transfer to low speed until it take off. You can take off oscillation function
by manual. The LED display will turn off if you don't control the fan in 30 seconds, touch
any button to turn on the display.
5. TIMER
: The fan is equipped with a timer that allows you to set its length of
operation from 1 hour to 12 hours. The LED display will turn off if you don't control the
fan in 30 seconds, touch any button to turn on the display.
6. OSCILLATION
function. The symbol is displayed on the LED display.
(Fig 3)
: Fan will start work at any speed you set up.
:
Fan will start work at low speed(5s)→medium speed(5s)→high
: 1） If you set the mode at high speed, fan will work at high speed at
: Fan will auto. Set up timer at 3 hours, oscillation function will
: Pressing the 'OSC' button will start and stop the oscillation
4
(Fig 4)