Table of Contents
Advertisement
STEP 4
Adjust level.
STEP 4
Intall the basin and glue.
8
STEP 5
Twist screw cover.
STEP 5
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN
WARNING:
Shut off power before wiring the mirror.
WARNING:
An Electrical option mirror must be wired to a 20 Amp
GFl(Ground Fault Interrupter) protected circuit when used in bathrooms
andall other locations required by the National Electric Code.
WARNING:
This mirror must be connected to a grounded, metalpermanent
wiring system or an equipment-grounding conductor must berun with the
circuit conductors and connected to the equipment groundingterminal or
lead on the mirror.
CAUTION:
Requires 120 VAC 20 Amp GFl protected circuit.
Electric wiring:
Be sure to provide enough
wire to make the proper and safe
connection to the Field/Power.
* Wire terminal plate is not included.
MIRROR FEATURES
• 5mm copper free silver mirror
• Hiah output LED lighting: CRI 9O+,2700-
640OK CCT,IP44
• Colour changing and dimmable touch switch
for surface LED
• Defogger
9
Advertisement
Table of Contents
