Yamaha YST-SW300 Owner's Manual page 10

To connect two units
Left speaker
This unit
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT1
To AC outlet
Switching the H.P.F. OUTPUT switch
After the connection is made, select the desired frequency
point (50 Hz, 80 Hz or 100 Hz) with the H.P.F. OUTPUT
switch.
Only frequencies higher than the selected frequency are output
from the H.P.F. OUTPUT terminals.
Normally, it is recommended to select the frequency point
nearer to the main speakers' minimum reproduceable
frequency.
10
AUTO PHASE INPUT2 H.P.F.OUTPUT
POWER
80Hz
ON OFF NOM REV 50Hz I00Hz
This unit
AUTO PHASE INPUT2 H.P.F.OUTPUT
POWER
80Hz
ON OFF NOM REV 50Hz I00Hz
To AC outlet
AUTO PHASE INPUT2
POWER
ON OFF NOM REV
OUTPUT AUTO PHASE INPUT2 H.P.F.OUTPUT
TO SPEAKERS POWER
80Hz
ON OFF NOM REV 50Hz I00Hz
FROM AMPLIFIER
INPUT1
PRE OUT
H.P.F.OUTPUT
80Hz
50Hz I00Hz
Pin plug cords
MAIN IN
Amplifier
H.P.F.OUTPUT
80Hz
50Hz I00Hz
Right speaker