Connections - Yamaha YST-SW300 Owner's Manual

• Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
• When making connections between this unit and other components, be sure all connections are made correctly and consistently,
that is to say L (left) to L, R (right) to R, "+" to "+" and "–" to "–".
• This unit can be connected to either the speaker terminals or the line output (pin jack) terminals of the amplifier. Choose one of
the ways shown below which is suitable for your audio system. Also, refer to the owner's manual for each component to be
connected to this unit.
CONNECTING TO SPEAKER TERMINALS OF THE AMPLIFIER
Disconnect your main speakers from the amplifier and connect them to this unit.
To connect one unit only
Right speaker
This unit
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT1
To connect two units
Right speaker
This unit
OUTPUT AUTO PHASE INPUT2 H.P.F.OUTPUT
TO SPEAKERS POWER
80Hz
ON OFF NOM REV 50Hz I00Hz
FROM AMPLIFIER
INPUT1
To AC outlet
6

CONNECTIONS

OUTPUT
TO SPEAKERS
FROM AMPLIFIER
AUTO PHASE INPUT2 H.P.F.OUTPUT
POWER
INPUT1
80Hz
ON OFF NOM REV 50Hz I00Hz
To AC outlet
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT1
AUTO PHASE INPUT2 H.P.F.OUTPUT
POWER
80Hz
ON OFF NOM REV 50Hz I00Hz
OUTPUT
TO SPEAKERS
FROM AMPLIFIER
INPUT1
Amplifier
Left speaker
Amplifier
Left speaker
This unit
OUTPUT AUTO PHASE INPUT2 H.P.F.OUTPUT
TO SPEAKERS POWER
80Hz
ON OFF NOM REV 50Hz I00Hz
FROM AMPLIFIER
INPUT1
To AC outlet