Table of Contents
Advertisement
3.
Connect the filler hose to the outlet of
the sealant bottle and turn clockwise by
90° to the stop.
4.
Unscrew the valve cap from the wheel
and screw the connecting piece of the
filler hose onto the valve.
5.
With the compressor switched off, in-
sert the connector into the power socket
in the vehicle interior.
Filling the tire with sealing
compound
Safety information
NOTICE
The compressor can overheat during ex-
tended operation. There is a risk of dam-
age to property. Do not run the compres-
sor for more than 10 minutes.
Filling the tire with sealing compound
1.
With standby state or drive-ready state
switched on, switch on the compressor.
Online Edition for Part no. 01405A7D6C6 - II/23
Wheels and tires
Let the compressor run for max. 10 mi-
nutes to fill in the tire sealant and reach
a tire pressure of 2.5 bar/36 psi.
While the tire is being filled with tire
sealant, the tire pressure can briefly
reach approx. 6 bar/87 psi. Do not turn
off the compressor in this phase.
2.
Switch off the compressor.
Checking the tire pressure
Read the tire pressure on the tire pressure
display of the compressor. The tire pressure
must be at least 2.5 bar/36 psi.
Tire pressure too high
If the tire pressure is too high, reduce the
tire pressure with the pressure reducing
valve on the compressor.
Minimum tire inflation pressure is not
reached
Do not continue driving unless a minimum
tire pressure of 2.5 bar/36 psi is reached.
Contact an authorized service center or
another qualified service center or repair
shop.
Minimum tire inflation pressure is
reached
1.
Pull the connector out of the socket in
the vehicle interior.
2.
Disconnect the hose from the sealant
bottle and the valve on the wheel.
MOBILITY
249
Advertisement
Table of Contents
