Table of Contents
Advertisement
CONTROLS
desired speed increases or decreases by
approx. 1 mph/1 km/h.
–
or
button: each time it is
pressed past the resistance point, the
desired speed changes by a maximum of
5 mph/10 km/h.
or
button: hold down to repeat the
action.
Adjusting the distance
Safety information
Warning
The system cannot serve as a substitute
for the driver's personal judgment. Due to
the system limits, deceleration can be late.
There may be a risk of accidents or risk of
damage to property. Be aware to the sur-
rounding traffic situation at all times. Ad-
just the distance to the traffic and weather
conditions and maintain the prescribed
safety distance, possibly by braking.
Reducing the distance
Press the button repeatedly until
the desired distance is set.
Increasing the distance
Press the button repeatedly until
the desired distance is set.
Continuing cruise control
General information
An interrupted cruise control can be contin-
ued by calling up the stored speed.
Make sure that the difference between cur-
rent speed and stored speed is not too large
before calling up the stored speed. Other-
174
Driving comfort
Online Edition for Part no. 01405A7D6C6 - II/23
wise, unwanted vehicle deceleration or ac-
celeration may occur.
In the following cases, the stored speed
value is deleted and cannot be called up
again:
–
When the system is switched off.
–
When drive-ready state is switched off.
Calling up the stored speed and
distance
Press the button with the system
interrupted. Cruise control is con-
tinued with the stored values. The
instrument cluster briefly displays the se-
lected distance.
Switching distance control on/off
Safety information
Warning
The system does not react to traffic driv-
ing ahead of you, but instead maintains
the stored speed. There may be a risk of
accidents or risk of damage to property.
Adjust the set speed to the traffic condi-
tions and brake as needed.
Switching distance control off
Distance control can be switched off and on
when driving with cruise control activated.
Press and hold this button.
Or:
Press and hold this button.
The indicator light in the instrument
cluster illuminates.
Advertisement
Table of Contents
