Mini COOPER SE Owner's Manual page 137

Hide thumbs Also See for COOPER SE:
Table of Contents

Advertisement

Activating
Switch position:
The indicator light in the instrument clus-
ter is illuminated when the low beams are
switched on.
System limits
The automatic headlight control cannot re-
place your personal judgment of lighting
conditions.
For example, the sensors are unable to de-
tect fog or hazy weather. In these situa-
tions, turn the lights on manually.
Daytime driving lights
General information
Switch position:
,
Depending on the national-market ver-
sion:
The daytime driving lights illuminate when
standby state is switched on.
Depending on the national-market version:
after switching off the Standby state, the
parking lights will illuminate in position
.
Activate/deactivate
In some countries, daytime driving lights
are mandatory, so it may not be possible to
deactivate the daytime running lights.
Via the Central Information Display (CID):
1.
"My MINI"
2.
"Vehicle settings"
3.
"Lighting"
4.
"Exterior lighting"
5.
Select the desired setting.
Online Edition for Part no. 01405A7D6C6 - II/23
Lights
Settings are stored for the currently used
vehicle key.
Cornering light
General information
Switch position:
In tight curves, for instance on mountain-
ous roads or when turning, an additional
cornering light is switched on that illumi-
nates the inside of the curve when the vehi-
cle is moving below a certain speed.
The cornering light is automatically
switched on depending on the steering-
wheel angle or, where applicable, the use
of turn signals.
When driving in reverse, the cornering
lights may be automatically switched on re-
gardless of the steering-wheel angle.
Adaptive headlight range con-
trol
The adaptive headlight range control fea-
ture balances out acceleration and braking
processes as well as the vehicle load condi-
tions in order to avoid blinding oncoming
traffic. Illumination of the road is optimized.
Automatic High Beam Assis-
tant
Principle
The Automatic High Beam Assistant detects
other road users early on and automatically
switches the high beams on or off depend-
ing on the traffic situation.
CONTROLS
137

Advertisement

Table of Contents
loading

Table of Contents