Disposal; Figure 1: Waste Electrical And Electronic Equipment (Weee) - Scanprobe X40 User Manual

SX40 User Manual
8
Caution:
Do not attempt to operate or charge the X40 System outside the recommended
temperature specifications, as this may damage the battery. Exposing the battery
to temperatures below -20°C or above 60°C may damage the battery or activate
the battery's safety systems, causing a permanent battery failure.

Disposal

The X40 System is classed as electrical equipment and is covered by the Waste Electrical and
Electronic Equipment Regulations 2013 (as amended). The X40 coiler and the Maxprobe™
CCU both contain batteries and by law must not be disposed of in landfill waste.

Figure 1: Waste Electrical and Electronic Equipment (WEEE)

Scanprobe Techniques Limited are registered with a WEEE Producer Compliance Scheme
with Registration Number WEE/MM5507AA. Any Scanprobe-manufactured electronic device
can be returned to the manufacturer at the end of its service life for disposal at no further
charge. Please contact Scanprobe directly to ask about the scheme.
Version 1.0
29 June 2022