Omega DP-7600 User Manual page 7

Data Acquisition & Display
: Press to set the display mode for actual reading.
Setup & Calibration Modes
: Press to record a complete setting and advance to the next setup.
Data Acquisition & Display
: Press to set the display mode for peak.
Setup & Calibration Modes
: Press to increment the digit/parameter being set.
Data Acquisition & Display
: Press to set the display mode for runout.
Setup & Calibration Modes
: Press to decrement the digit/parameter being set.
Data Acquisition & Display
: Press to record the current reading as the tare value.
Setup & Calibration Modes
: Press to advance to the next digit to be set.
Data Acquisition & Display
: Press to toggle between absolute and relative reading mode.
Setup & Calibration Modes
: Press to exit the setup or calibration mode at any time (all prior
changes are saved).
2