Table of Contents
Advertisement
OPERATION WITH CONTROL INSTRUCTIONS
(Using CAV discs)
Using the built-in microprocessor, you can memorize the
segment data-the segment number and the beginning
and end frame numbers of the segment-in the
LDP-1000A and play these segments in any desired
order and also at any playback speed-fast (x3),
normal, slow (x1/5) or frame-by-frame. It is
also possible to jump to another series of
playback program during the perfor-
mance of a series of playback pro-
gram. This is called "Branching".
The control instructions for
playing or branching are
stored on numbers 000
to 511 in the memory.
These numbers are
called
"Line
Numbers".
LINE 001
LINE 000
STOP 00010
TIME 000
On some GAV discs, the segment data and control instruc-
tions are recorded on the beginning portion of the audio
channel 2. You can use these data to play the disc, of
course, and also play the same disc with another control in-
structions when you enter the new data by using the control
unit of the LDP-1000A.
This part of instruction manual tells you how to memorize
the segment data and the control instructions for playing
and branching.
MEMORY OF THE DATA
TO
BE ENTERED
The memory of the entered segment data and control in-
structions will be kept on the LDP-1000A for three days,
or until new data or control instruction is entered.
LINE 255
LINE 254
LINE 256
PLAY S--050
PAGE 1
LINE 511
19
Advertisement
Table of Contents
