Table of Contents
Advertisement
PRECAUTIONS
• This machine is designed for operation in a horizontal
position and only with a 120 V ac, 60 Hz power supply.
• Do not install the set in a location near heat sources,
such as radiators or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration or shock.
• Allow adequate air circulation to prevent internal heat
buildup. Do not place the set on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may block
the ventilation holes.
• After playing a disc, remove it from the compartment if
the set will not be used for any length of time. Do not
transport the set with a disc in place.
• To disconnect the cord, pull it out by the plug. Never pull
the cord itself.
• Should any solid object or liquid fall into the cabinet,
unplug the set and have it checked by qualified personnel
before operating it any further.
• Do not operate the set right after having transported it
from a cold location directly to a warm location or in a room
whose temperature rises suddenly, because moisture may
condense in the operating section of the set. Wait for about
an hour before turning the power on in the new location or
let the room temperature rise gradually.
• Clean the cabinet, panel and controls with a dry soft
cloth, or soft cloth lightly moistened with a mild detergent
solution. Do not use any type of solvent such as alcohol or
benzine which may damage the finish.
• Remove the cushion and be sure to save it. When the
LDP-1000A is transported or when shock to the compart-
ment lid is expected, be sure to attach the cushion.
• Save the original shipping carton and packing material;
they will come in handy if you ever have to ship your set. For
maximum protection, repack the set as it was originally
packed at the factory.
• If you have any questions about this machine, contact
your dealer or your nearest Sony authorized service facility.
LOOSEN THE SHIPPING SCREW UNDERNEATH
THE PLAYER.
The shipping screw is screwed down at the factory to
secure the mechanism inside the player.
Be sure to turn the shipping screw counterclockwise
with a coin or similar object until the screw is loose
soon after unpacking.
l
Shipping screw
3
Advertisement
Table of Contents
