Advertisement
Available languages
Available languages
User Manual
IR Pin Definition
IR Receiver pin's definition is as below:
Remote Control
Power on or standby: Press this button to power on the switcher or set it
to standby mode.
HD 1/2/3/4 press these buttons to select input source on single screen
display mode, and the corresponding input LED on the front panel with
light in green.
◄ / ►: Press these buttons to circularly select the last or next input
source on single screen display mode.
: Multiview display mode switching button.
▪ Short press this button to circularly select SINGLE - PIP - PBP
(1) -
PBP (2) - Triple (1) - Triple (2) - Quad (1) - Quad (2).
▪ Long press this button for 3 seconds to select the aspect ratio for
PBP (1) / PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad (2).
: Output resolution switching button.
▪ Short press the RES button to circularly switch the output
resolution of the HDMI OUTPUT port (Please refer to the output
resolution list of "8. Video & Audio")
▪ Long press the RES button for 3 seconds to switch the output
resolution to 720P60.
MENU, EXIT, LEFT, RIGHT, UP, DOWN, OK: OSD Menu navigation buttons.
A-IN: Press this button to pop up the audio channel selection OSD, then
press the UP / DOWN button to select the audio output channel. (The
output audio follows the video source by default.)
Mute: Press this button to mute / unmute the audio.
VOL-, VOL+: Press these buttons to increase / decrease the audio
output volume.
English
Advertisement
