Lindy 38228 User Manual page 12

User Manual
▪
Output Page
You can do the following operations on the Output page:
 Multi-View Adjustment: Click to select the desired screen display mode. There are eight modes
available: SINGLE - PIP - PBP(1) - PBP(2) - Triple(1) - Triple(2) - Quad(1) - Quad(2).
 PIP Adjustment: In the PIP mode, you can switch the location and size of the PIP and set the user-
defined PIP, as shown in the following table.
Size
Small
Medium (Middle)
Large
User
 Multi-viewer Display: Display the input and output.
 Source input: Select the input signal source. You should select the window in "Multi-Viewer Display"
firstly, and then click "HDMI 1/2/3/4" in "Source Input" to select a signal source, or click ◄ / ► to select
the last/next signal source.
 Aspect: Click "Full Screen" or "16:9" to switch the display aspect. Only the following modes are
available: PBP(1) - PBP(2) – Triple(1) – Triple(2) – Quad(2).
 Auto Switch: Enable or disable the function of automatically switching input signal source, available
only in SINGLE Mode.
 Output Setting: Set the output resolution, video keep alive, PC/Video PQ, HDCP, Audio source and
Audio output.
Relative Position
(Starting Position)
Start Point X: 71
Start Point Y: 71
Start Point X: 61
Start Point Y: 61
Start Point X: 51
Start Point Y: 51
Start Point X: 1-100
Start Point Y: 1-100
Height and Width of the Inner
Frame
Width: 30
Height: 30
Width: 40
Height: 40
Width: 50
Height: 50
Width: 1-100
Height: 1-100
English