Advertisement
Available languages
Available languages
User Manual
6
AUTO Button
7
INPUT Button
8
Multiview
Button
9
RES Button
No.
Name
1
L/R port
2
OPTICAL Port
3
HDMI Output Port
4
HD 1-4 INPUT Ports
5
RS-232 Port
6
IR EXT Port
7
DC 12V
Automatic switching button, only available in single screen display mode.
Input source switching button, only available in single screen display mode.
Multiview display mode switching button.
▪ Short press this button to circularly select SINGLE - PIP - PBP (1) - PBP
(2) - Triple (1) - Triple (2) - Quad (1) - Quad (2).
▪ Long press this button for 3 seconds to select the aspect ratio for PBP (1) /
PBP (2) / Triple (1) / Triple (2) / Quad (1) / Quad (2).
▪ Short press the RES button, the OSD will display the current output
resolution of the HDMI OUTPUT port. Short press the RES button again
before the OSD disappears to circularly switch the output resolution (Please
refer to the output resolution list of "8. Video & Audio").
▪ Long press the RES button for 3 seconds to switch the output resolution to
Rear Panel
HDMI signal output port, connected to HDMI display device such as TV
HDMI signal input ports, connected to HDMI source device such as
3-pin phoenix connector, connected to a PC or control system for serial
port upgrade or RS-232 command control.
IR signal receiving port, connected with 38KHz IR Receiver cable. If the
IR signal receiving window of the unit is blocked or the unit is installed
in a closed area out of infrared line of sight, the IR receiver cable can be
inserted to the "IR EXT" port to receive the IR remote signal.
Output resolution switching button.
720P60.
Function Description
PCM2.0 Analog audio output port.
Optical fibre digital audio output port.
or Monitor with HDMI cable.
DVD or Set-top box with HDMI cable.
DC 12V/2.5A power input port.
English
Advertisement
