Advertisement
Quick Links
LEGENDS PINBALL 4KP SURROUND SOUND FEEDBACK SSF KIT
ATTENTION
!
Tools/Parts Required
Phillips head screwdriver
(not included)
SSF Kit Component Parts List
Exciter speaker x 4
Ampli er board x 1
Images and instructions are for reference only and subject to change. © 2024 AtGames.
This product was not designed for the average user. Instead, it was created for a more technical DIY (Do It Yourself)
user. The expectation is that the user of this product is experienced in modding and is prepared for and aware of the
risks in the handling of sensitive electronic components.
(not included)
(included)
Power supply board x 1
Metal Shield Cover for
Power supply board x 1
WARNING
!
Two adults required for safe assembly and
installation. Make sure power cable is
unplugged prior to installation.
Subwoofer box set
February 5, 2024. Version 1.1
1.
Advertisement
Related Manuals for AtGames LEGENDS PINBALL 4KP SURROUND SOUND FEEDBACK (SSF) KIT
Summary of Contents for AtGames LEGENDS PINBALL 4KP SURROUND SOUND FEEDBACK (SSF) KIT
- Page 1 Power supply board x 1 Subwoofer box set Ampli er board x 1 Metal Shield Cover for Power supply board x 1 February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 2 6 For side rails and lockdown bar x 13 For power supply board and ampli er board x 8 February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 3 Note: Please do not put the screws away, they will be needed later during assembly. The types of screws should not be mixed. Please note which screw you have taken from where. February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 4 2-1 Assemble F2 8 hexagonal screw columns. February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames. Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 5 February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames. Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 6 ＊Do not over-tighten the screws to avoid damage. February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames. Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 7 Power ampli er board (plug into CN2) with 8 pin cable. February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames. Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 8 Connect Exciter speaker (SIDE RIGHT) Connect Exciter speaker (SIDE LEFT) connection cable to Ampli er board connection cable to Ampli er board SSOL. SSOR. February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames.
- Page 9 Step 17 Connect the USB data cable to the Connect the USB data cable to the motherboard (USB3). ampli er board (USB2.0). February 5, 2024. Version 1.1 Images and instructions are for reference only and subject to change. © 2024 AtGames.
-
Page 10: Safety Notice
Standard warranty coverage for the AtGames Legends 4K SSF Kit does not apply to and is considered invalid due to misuse, improper maintenance, self-repair, tampering, or invasive hardware modifications of any kind, and damages or dysfunction caused by shipping or non-manufacturing related causes. - Page 11 PO Box 1691, El Segundo, CA 90245 All rights reserved. *Content and images are for reference only and subject to change. The trademarks and images are the properties of their respective owners. © 2024 AtGames Made in China February 5, 2024. Version 1.1...
Need help?
Do you have a question about the LEGENDS PINBALL 4KP SURROUND SOUND FEEDBACK (SSF) KIT and is the answer not in the manual?
Questions and answers