Advertisement
Quick Links
HOW TO REPLACE SPINNER HA8801
Step 1
Remove the control top from the arcade.
Step 3
Turn the control top upside down and remove
the screws on the bottom of the control top.
Right Spinner
Right Spinner
Step 5
Disconnect the cables on the spinner that
you'd like to replace.
Left Spinner
Left Spinner
Images and instructions are for reference only and subject to change. © 2021 AtGames.
Tools you need:
．Phillips screwdriver
．2.0 hex key
Step 2
Use the 2.0 hex key to remove the spinner.
Step 4
Open up the control top and pull out the pinball
kit cable carefully.
Step 6
Use a screwdriver to loosen the screws.
Advertisement
Related Manuals for AtGames HA8801
Summary of Contents for AtGames HA8801
- Page 1 Right Spinner Left Spinner Step 5 Step 6 Disconnect the cables on the spinner that Use a screwdriver to loosen the screws. you’d like to replace. Images and instructions are for reference only and subject to change. © 2021 AtGames.
- Page 2 ．21.65 inch pink cable (#HAA340_W55): To connect the Right Spinner and the Left Spinner. Step 12 Step 13 Put the control top cover back and fasten the screws. Fasten the spinner cap with the hex key. Images and instructions are for reference only and subject to change. © 2021 AtGames.
Need help?
Do you have a question about the HA8801 and is the answer not in the manual?
Questions and answers