Table of Contents
Advertisement
•
Extend the milling cutter as much as possible by turning the
adjustment handle (5).
•
Press the locking button (B), keep it pressed, and loosen the
nut (C) with the provided 22 mm open-end wrench.
•
Remove the milling cutter.
•
Now, remove the milling cutter (D).
•
To insert the milling cutter, follow the reverse order.
CAUTION!
!
Risk of injury due to inadequately secured milling cutter. Always tighten the securing nut of the milling cutter
firmly!
EN EN
15
Advertisement
Table of Contents
