Switching Off The Tebi 3.0 In An Emergency; Elimination Of Malfunctions; Decommissioning - Bevel Tools Mite TEBI 3.0 Instruction Manual

• Without using the prism:
▪ Place the workpiece (A) on the milling plate (B), align
the edge to be processed with the cutter(C), and feed
the workpiece along the cutter.
• When using a prism:
▪ Insert the workpiece (W) from the operator's side,
seen from the left side, and feed it over the cutter.
After processing, remove the workpiece from the opposite
side.
7.4 Turning Off the TEBI 3.0
Turn off the machine using the On/Off switch (1).
7.5 Emergency Shutdown of the TEBI 3.0
In case of an emergency to bring the TEBI 3.0 to a stop,
immediately press the On/Off switch (1).
7.6 Troubleshooting
To troubleshoot issues, follow the procedures described in
Chapter 8.
7.7 Shutdown
• Turn off the machine using the On/Off switch (1).
• Unplug the Schuko plug from the power outlet.
EN
12