mondaine stop2go Quick Start Manual

mondaine stop2go Quick Start Manual

Wifi clock
Hide thumbs Also See for stop2go:

Advertisement

QUICK
START
Mondaine SBB
stop2go WiFi Clock

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the stop2go and is the answer not in the manual?

Questions and answers

Summary of Contents for mondaine stop2go

  • Page 1 QUICK START Mondaine SBB stop2go WiFi Clock...
  • Page 3 Remove the lid from the case back, place two lithium AA batteries in the clock Choose your language Press both blue buttons for about 5 seconds to start the Choose your WiFi (SSID) searching function when setting the clock for the first time. When setting the clock for a second time: Only press the M.SET button for 5 seconds.
  • Page 4 WiFi clock only supports 2.4G connection SAVE YOUR SETTINGS BUTTON SUMMER AND WINTER TIME WiFi clock connected successfully: “Your Mondaine clock is connected“, Time changes are not done automatically. This needs to be set then you can exit the mobile phone setting interface;...
  • Page 5 How to enter the Settings screen Fault verification and solution (Special case) Due to compatibility limitation of some mobile devices, the following FAULT 1 situations may occur. The corresponding operations are as follows: After the WiFi clock is powered on, the hands keep moving (it stops for a short time every 10 seconds and then starts again.
  • Page 6 01/24 GGM.D078...

Table of Contents