Specifications SC-311T Low Capacity (NTEP) SC-321T Medium Capacity (NTEP) SC-310 Low Capacity SC-320 Medium Capacity Capacities and Divisions Capacities and Divisions Shroud Shroud Scale weight Scale weight Platform size Platform size Base dimensions Base dimensions Units of measure Controls ZERO TEST Display dimensions: Power...
Page 5
Introduction Calibration ß Zeroing Range ZERO TEST ß Power Line Frequency...
Page 6
ZERO TEST ZERO ß Unit of Measure TEST ß ZERO Capacity and Division Size TEST ß Calibration ZERO TEST TEST...
Page 7
TEST Configuration ß Filtering Rate TEST ZERO TEST ZERO ß Baud Rate and Parity...
Page 8
TEST ZERO Table: Baud Rate and Parity Display Codes TEST...
Page 13
Selecting RS-232 Protocol ZERO TEST ZERO TEST RS-232 Protocol Tables Legend:...
Page 14
Notes: ProBench Scale Status Byte Formats...
Page 15
Standard ProBench Protocol Displayed as "Std" Command Possible Scale Response Units Notes W<CR> <LF>pXX.XXLB<CR><LF>[HL]<CR><ETX> Pounds <LF>pXX.XXKG<CR><LF>[HL]<CR><ETX> Kilos <LF>pXX.XXOZ<CR><LF>[HL]<CR><ETX> Ounces <LF>p0XXXXOZ<CR><LF>[HL]<CR><ETX> Ounces 2, 3 Z<CR> <LF>[HL]<CR><ETX> Zeros scale S<CR> <LF>[HL]<CR><ETX> All other <LF>?<CR><ETX> command Model 3825 Protocol Displayed as "3825" Command Possible Scale Response Units Notes...
Page 16
Model 3835 Protocol Displayed as "3835" Command Possible Scale Response Units Notes W<CR> <LF>p0XX.XXLB<CR>[HL]<ETX> Pounds 1, 2 <LF>p0XX.XXKG<CR>[HL]<ETX> Kilos 1, 2 <LF>p0XX.XXOZ<CR>[HL]<ETX> Ounces 1, 2 <LF>p00XXXXOZ<CR>[HL]<ETX> Ounces 2. 3 Z<CR> No response Zeros scale S<CR> <LF>[HL]<CR> All other <LF>?<CR> command Model 8213 Protocol Displayed as "8213"...
Loadcell Replacement Weight Sensor Capacity: Feeler Gauge Distance: Cable Assembly Interface Cable for Rev. A or B PC Board (7405-09087) WIRE COLOR SIGNAL J2 PIN NO.
Page 18
Interface Cable for Rev. C or Later PC Board (7405-09087) WIRE COLOR SIGNAL J2 PIN NO.
Page 25
Weigh-Tronix Weigh-Tronix Canada, ULC Weigh Bar ® is a registered trademark of Weigh-Tronix Inc. 03/06/01 PROBEN_S.P65 PN 7424-09589e1 Printed in USA...
Need help?
Do you have a question about the ProBench Series and is the answer not in the manual?
Questions and answers