Useful Functions; Mold Proof Operation - Daikin FTXV80WVMA Operation Manual

MOLD PROOF Operation

NOTE
Note on MOLD PROOF setting
• The display automatically returns to the default screen after 60 seconds. To return to the default screen sooner, press
Notes on MOLD PROOF operation
• When you want to stop MOLD PROOF operation midway, press
• After DRY or COOL operation stops, the air conditioner starts MOLD PROOF operation automatically, and then stops automatically 60 minutes later.
• This operation dries the inside of the air conditioner while MOLD PROOF operation is performed to reduce the development of mold and
odour inside the air conditioner. But the function does not remove any adhered dust and mold.
• MOLD PROOF operation is not available when the unit is turned off using the OFF TIMER or turned off using a smartphone.
The inside of the air conditioner is dried to reduce the occurrence of mold and odour.
When COOL or DRY operation is performed, condensation may occur inside the air
conditioner and may cause mold or odour. It is recommended to dry the inside of the
air conditioner using MOLD PROOF operation.
[To operate automatically]
„ To set
1.
Press
2.
Press or
• " " appears on the LCD.
• " " (menu number) blinks.
3.
Press
4.
Press or
Automatic operation is disabled
5.
Press
• Automatic MOLD PROOF operation will be enabled or disabled according to
the chosen setting.
• If automatic MOLD PROOF operation is enabled, "
PROOF lamp lights green when MOLD PROOF operation is in progress.
Display
6.
Press
and hold the button for 2 seconds.
and select menu number .
to confirm the selected setting.
to change the setting as follows:
Automatic operation is enabled
(default)
again.
to return to the default screen.
twice.

Useful Functions

" appears on the LCD and the MOLD
twice.
16