Daikin FTXV80WVMA Operation Manual page 26

TIMER Operation
ON/OFF TIMER Operation
NOTE
Note on COUNT UP-DOWN ON/OFF TIMER
• After setting, the time displayed on the LCD will automatically count down by 1 hour for every 1 hour that passes.
For example, if the OFF TIMER is set to 3 hours, the display will change as follows: 3hr  2hr  1hr  blank (OFF)
Switching between ON/OFF TIMER display modes (24 hour clock and hours remaining display)
• When changing timer display modes (from 24 HOUR ON/OFF TIMER to COUNT UP-DOWN ON/OFF TIMER or vice versa), the timer
cancels. The timer must be set again to activate it.
25
[ON/OFF TIMER with an hours remaining display]
(COUNT UP-DOWN ON/OFF TIMER)
• Check that the clock is correct. If not, set the clock to the present time.
1.
Press and hold
5 seconds, when signal indicater ( ) blink,
release your finger from the button.
For ON TIMER
"
"
For OFF TIMER
"
"
• " " and day of the week disappear from the LCD.
2.
Press until the time setting reaches the
point you like.
• Each pressing of the button increases or decreases the time setting by 1 hour.
• The time can be set between 1 and 12 hours.
3.
Press
• " " and " ", and setting time appear on the LCD.
• The TIMER lamp lights orange.
• To change the display mode from COUNT UP-DOWN ON/OFF TIMER to 24 HOUR ON/OFF
TIMER, repeat STEP
• Timer display mode cannot be changed while "
Press or
Display
„ Combining display modes
• Different display modes (24 HOUR ON/OFF TIMER and COUNT UP-DOWN ON/OFF TIMER)
can be used for the ON TIMER and OFF TIMER simultaneously.
(Example)
Present time: 22:00 (The unit is operating)
OFF TIMER at 1:00 (3 hours after persent time)
ON TIMER at 6:00 (8 hours after persent time)
or
" appears on the LCD.
" blinks.
" appears on the LCD.
" blinks.
or again.
1 2
, and continue from STEP of "24 HOUR ON/OFF TIMER".
to stop the blinking.
Combined
Page 10
for about
Page 23,24
" or " "are blinking.