Table of Contents
Advertisement
Features And Controls
Seat Removal and Installation
• Pull up on front of seat and push toward
the front of vehicle.
• Install the seat by sliding the tabs into
the rear of the seat base.
• Push down firmly on the front of the
seat until the pins are fully seated into
the grommets.
Seat Belts
Your UXV450i is equipped with lap-
shoulder seat belts for the operator and
passenger. The seat belts should be
used by the driver and passenger each
time the UTV is driven.
If you want to adjust your seat belt height.
Remove the bolt and nut, adjust position
to the desired height. Then tighten the
bolt and nut.
Seat Belts
27
1
Three positions
Advertisement
Table of Contents
