Yamaha RX-V1700 Owner's Manual page 89

Input menu 3 INPUT MENU
Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.
Parameter
A)I/O ASSIGNMENT
B)INPUT RENAME
C)VOLUME TRIM
D)DECODER MODE
E)MULTI CH SET
Option menu 4 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Parameter
A)DISPLAY SET
B)MEMORY GUARD
C)AUDIO SELECT
D)DECODER MODE
E)PARAM.INI
F)ZONE SET
G)XM RADIO SET
H)DOCK SET
Note
The "XM RADIO SET" parameter is only applicable to the U.S.A. and Canada models.
■ Signal information
Use this feature to check audio signal information (see page 42).
Assigns the input/output jacks of this unit according to the component to be used.
Changes the name of the input source.
Adjusts the output volume of each jack.
Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear
panel of this unit.
Adjusts the direction of the signals input into the center, subwoofer, and surround channels
when a source component is connected to the MULTI CH INPUT jacks.
Adjusts the brightness of the display and converts video signals.
Locks sound field program parameters and other "SET MENU" settings.
Initializes the parameters of a group of sound field programs.
Selects whether to initialize the settings or to recall the previous settings for the input mode
selected in INPUT MENU.
Initializes the parameters of a group of sound field programs.
Adjusts the Zone 2 and Zone 3 parameters.
Displays the current reception level of XM Passport System.
Selects whether this unit charges the battery of the connected iPod or not when this unit is in
the standby mode.
SIGNAL INFO
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Features
Features
Page
94
95
96
96
96
Page
97
98
99
99
99
99
100
100
85
En