Yamaha RX-V1700 Owner's Manual page 11

0 MACRO ON/OFF
Turns on or off the macro function (see page 107).
A MACRO
Programs a series of operations to be controlled with a
single button (see page 107).
B STANDBY
Sets the main zone to the standby mode (see page 31).
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
C POWER
Turns on the main zone (see page 31).
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
D AUDIO SEL
Toggles the priority for the type of audio input jack
between "AUTO", "HDMI", "COAX/OPT" and
"ANALOG" when one component is connected to two or
more input jacks (see page 40).
E SLEEP
Sets the sleep timer (see page 43).
F MULTI CH IN
Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page 41).
G SELECT k / n
Selects another input source that you can control
independently of the input source selected with the input
selector buttons.
H Operation mode selector
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input
selector button (see page 102).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 101).
Notes
• To set the remote control codes for other components, see
page 103.
• When you set the remote control codes for both DTV/CBL and
PHONO (see page 103), priority is given to the one set for
DTV/CBL.
I VOLUME +/–
Increases or decreases the volume level.
J MUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 41).
K PURE DIRECT
Turns on or off the pure direct mode (see page 50).
L SET MENU
Enters "SET MENU" (see page 86).
M PARAMETER
Displays sound field parameter settings in the on-screen
display (OSD) (see page 76).
N STRAIGHT
Turns the sound field programs off or on. When the
"STRAIGHT" mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 49).
O EXTD SUR.
Switches between 5.1 and 6.1/7.1-channel playback of
multi-channel sources (see page 80).
P SELECT
Selects decoders for 2-channel sources (see pages 80 and
82).
Q ENHANCER
Turns on or off the Compressed Music Enhancer mode
(see page 52).
R NIGHT
Turns on or off the night listening modes (see page 53).
S RENAME
Changes the name of the input source in the display
window (see page 106).
T CLEAR
Clears remote control functions acquired from the learn,
macro and/or rename features (see page 110).
U LEARN
Programs remote control codes of functions from other
remote controls (see page 105).
CONTROLS AND FUNCTIONS
7
En