Table of Contents
Advertisement
Grinding, and Wire Brushing Instructions
TO PREVENT SERIOUS INJURY:
Grip the tool firmly in both hands.
1.
Make sure that the Power Switch is in
5.
Apply the wheel to the work material at a 10° — 15°
the off-position, then plug in the tool.
angle, allowing the tool to operate at full speed.
;
If the tool bogs down, use lighter pressure.
2.
Place one hand on the motor housing the other
on the side handle before starting the tool.
6.
To create a smoother surface,
keep the tool moving over the work surface.
3.
Start the tool by pressing the Power
Switch forward until it locks in place.
7.
TO PREVENT ACCIDENTS, AFTER USE:
Turn off the tool by pushing the
4.
Allow the tool to come up to full speed
Power Switch backward.
before touching the work material.
WARNING!
Allow the tool to come to a complete
stop before setting it down.
Unplug the tool. Clean, then store the
tool indoors out of children's reach.
Sanding Instructions
AWARNING
TO PREVENT SERIOUS INJURY:
Grip the tool firmly in both hands.
1.
Wipe the work surface clean of all dirt and debris,
6.
Keep heavy pressure off of the tool when operating.
especially that of previous
Allow the tool to do the work.
coarser sanding sessions, which will scratch
the surface of a finer grit sanding session.
7.
Move the tool in a uniform pattern up and down or
side to side while sanding to ensure even sanding.
2.
Attach the desired grit Sanding Disk
(sold separately) onto the Spindle.
8.
Periodically, stop the tool and check for disc wear.
Replace worn sanding discs as needed.
3.
Make sure that the Power Switch the
z
Turn off the tool by pushing the
pee
4.
Start the tool by pressing the Power
Power Switch backward.
x
Switch forward until it locks in place.
WARNING!
Allow the tool to come to a complete
=
5. Wait until the tool has reached full speed,
stop before setting it down.
Oo.
Unplug the tool. Clean, then store the
oO
then gently contact the surface.
.
.
tool indoors out of children's reach.
Haver
Item 64856
For technical questions, please call 1-888-866-5797.
Page 15
Advertisement
Table of Contents
