Download
Share
Print this page
Bauer 2161CR-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Grinder
  5. 2161CR-B
  6. Owner's manual & safety instructions

Bauer 2161CR-B Owner's Manual & Safety Instructions

Brushless 20v hypermax lithium slide switch angle grinder
Hide thumbs Also See for 2161CR-B:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
For Best Results,
For Best Results,
Use 3.0 Amp Hour
Use 3.0 Amp Hour
Battery or Greater
Battery or Greater
(Sold Separately)
(Sold Separately)
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21i

Advertisement

loading

Related Manuals for Bauer 2161CR-B

Summary of Contents for Bauer 2161CR-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Table of Contents Safety ............2 Maintenance ..........16 Specifications ..........10 Parts List and Diagram ......18 Setup ............11 Warranty ............ 20 Operation ........... 13 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Safety

    Electrical Safety Do not expose power tools to rain or wet conditions. Personal Safety 1. Stay alert, watch what you are doing and 4. Remove any adjusting key or wrench use common sense when operating a before turning the power tool on. power tool.
  • Page 4 Battery tool use and care 1. Recharge only with the charger specified by 3. When battery pack is not in use, keep it away the manufacturer. A charger that is suitable from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
  • Page 5 10. Hold power tool by insulated gripping surfaces 20. Use clamps (not included) or other practical only, when performing an operation where ways to secure and support the workpiece to the accessory may contact hidden wiring a stable platform. Holding the work by hand or its own cord.
  • Page 6 Kickback and Related Warnings 1. Maintain a firm grip on the power tool and Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush position your body and arm to allow you to or any other accessory. Pinching or snagging resist kickback forces.
  • Page 7 Safety Warnings Specific for Sanding Operations Do not use excessively oversized sanding disc paper. Follow manufacturer’s recommendations when selecting sanding paper. Safety Warnings Specific for Wire Brushing Operations 1. Be aware that wire bristles are thrown by 2. If the use of a guard is recommended for the brush even during ordinary operation.
  • Page 8 Vibration Safety This tool vibrates during use. Repeated or 2. Do not smoke during use. Nicotine reduces long-term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury, increasing the risk of vibration-related injury. particularly to the hands, arms and shoulders.
  • Page 9 Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.

  • Page 10: Specifications

    Specifications Bauer 20V Li-Ion Battery Type Battery Pack (64816) Bauer 20V Li-Ion Charger Type Charger (57006) No Load Speed 10,500/min Spindle Thread 5/8″-11 UNC Capacity 4-1/2" (115mm) Page 10 For technical questions, please call 1-888-866-5797. Item 58308...

  • Page 11: Setup

    Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch/Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section.
  • Page 12 Installing Wheel Guard TO PREVENT SERIOUS INJURY: Do not operate this tool without the Wheel Guard properly installed. Note: Grinding Wheel sold separately. 5. Replace Disc Flange. Make sure the flats on bottom of the Disc Flange are engaged with Note: Make sure Battery Pack is removed and tool the depressed center of the Wheel Guard.
  • Page 13 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch/Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section.
  • Page 14 Charging Charge battery before using this tool. Follow instructions included with battery charger. Workpiece and Work Area Set Up 1. Designate a work area that is clean and well-lit. 4. You must use personal safety equipment including, The work area must not allow access by children but not limited to, ANSI-approved eye and hearing or pets to prevent distraction and injury.
  • Page 15 Sanding Instructions TO PREVENT SERIOUS INJURY: Grip the tool firmly in both hands. 1. Wipe the work surface clean of all dirt and debris, 6. Allow the tool to come up to full speed especially that of previous before touching the work material , coarser sanding sessions, which will scratch then gently contact the surface.

  • Page 16: Maintenance

    Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch/Trigger is in the off-position and remove its Battery Pack before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment.
  • Page 17 Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Battery Pack not properly connected. 1. Remove Battery Pack, make sure there are no obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.

  • Page 18: Parts List And Diagram

    Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 19 Assembly Diagram Item 58308 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

This manual is also suitable for:

58308