Table of Contents
Advertisement
=
=
=
a
m
=
>
=
2)
m
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PRE
ENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration occurs,
have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.
BEFORE EACH USE, inspect the general
2.
AFTER USE, wipe external surfaces
condition of the tool. Check for:
of the tool with clean cloth.
* loose hardware,
3.
Periodically, wear ANSI-approved safety goggles
* misalignment or binding of moving parts,
and NIOSH-approved breathing protection
and blow dust and grit out of the motor
* damaged cord/electrical wiring,
Sr
RE
RR
Fo
* cracked or broken parts, and
*
any other condition
that may
AWARNING!
If the supply cord
of this
affect its safe operation.
power tool is damaged, it must be replaced
only by a qualified service technician.
Accessory Storage and Handling
1.
Handle accessories carefully to prevent
2.
Store accessories in shelves, racks, boxes, or
dropping or bumping.
Do not use wheels
drawers.
Keep storage area dry and above
that have been dropped or bumped.
freezing. Any grinding or cut-off wheels exposed to
humidity or freezing temperatures must not be used.
Page 16
For technical questions, please call 1-888-866-5797.
Item 64856
Advertisement
Table of Contents
