Download
Share
Print this page
Bauer 1761C-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Grinder
  5. 1761C-B
  6. Owner's manual & safety instructions

Bauer 1761C-B Owner's Manual & Safety Instructions

4-1/2 cordless angle grinder
Hide thumbs

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the back
of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt
in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
For Best Results,
Use 3.0 Amp Hour Battery
or Greater
Grinding Wheel, Battery and
Charger Sold Separately
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
22b

Advertisement

loading

Related Manuals for Bauer 1761C-B

Summary of Contents for Bauer 1761C-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    table of Contents Safety ................2 Operation ..............10 Specifications ............8 Maintenance .............13 Setup .................8 Warranty ..............16 WARninG SyMBOLS AnD DEFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    Electrical Safety Do not expose power tools to rain or wet conditions. personal Safety 1. Stay alert, watch what you are doing and 4. Remove any adjusting key or wrench use common sense when operating a before turning the power tool on. power tool.
  • Page 4 Battery tool use and care 1. Recharge only with the charger specified by 3. When battery pack is not in use, keep it away the manufacturer. A charger that is suitable from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.
  • Page 5 11. never lay the power tool down until the The battery charger gets hot during accessory has come to a complete stop. use. The charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot 12.
  • Page 6 4. Use special care when working corners, sharp 5. Do not attach a saw chain woodcarving edges etc. Avoid bouncing and snagging the blade or toothed saw blade. Such blades accessory. create frequent kickback and loss of control. have a tendency to snag the rotating accessory and cause loss of control or kickback.
  • Page 7 Grounding tO pREVEnt ELECtRiC SHOCK AnD DEAtH FROM inCORRECt GROUnDinG WiRE COnnECtiOn: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug.

  • Page 8: Specifications

    Specifications Bauer 20V Li-ion: Battery Type 64816 (sold separately) Bauer 20V Li-ion: Charger Type 63947 (sold separately) No Load Speed : 7000/min Spindle Thread 5/8″–11 UNC Wheel Diameter 4-1/2″ Setup - Before Use: Read the EntiRE iMpORtAnt SAFEty inFORMAtiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
  • Page 9 installing the Auxiliary Handle tO pREVEnt SERiOUS inJURy: Do not operate this tool with one hand only or without the Auxiliary Handle properly installed. 1. The Auxiliary Handle may be installed in one of two positions, on either side of the Gear Housing. 2.

  • Page 10: Operation

    Operating instructions Read the EntiRE iMpORtAnt SAFEty inFORMAtiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. tool Set Up tO pREVEnt SERiOUS inJURy FROM ACCiDEntAL OpERAtiOn: Make sure that the trigger Switch is in the off-position and remove the Battery pack before performing any procedure in this section.
  • Page 11 installing a threaded Accessory 1. The accessory MUST be: 2. Press in and hold the Spindle Lock Button • rated to at least 7,000 RPM to prevent the Spindle from turning. • 4-1/2″ (115 mm) in diameter 3. Remove the Outer Flange and Inner •...
  • Page 12 Grinding instructions tO pREVEnt SERiOUS inJURy: Grip the tool firmly in both hands. 1. Make sure that the Trigger Switch is in the 6. To create a smoother surface, “OFF” position, then connect the battery pack. keep the tool moving over the work surface. 2.

  • Page 13: Maintenance

    Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO pREVEnt SERiOUS inJURy FROM ACCiDEntAL OpERAtiOn: Make sure that the trigger Switch is in the off-position and remove its Battery pack before performing any procedure in this section. tO pREVEnt SERiOUS inJURy FROM tOOL FAiLURE: Do not use damaged equipment.
  • Page 14 troubleshooting problem possible Causes Likely Solutions Tool will not start. 1. Battery Pack not properly connected. 1. Remove Battery Pack, make sure there are no obstructions, reinsert the Battery Pack according to its shape (it should only fit one way), and press firmly until the Battery Pack locks in place.
  • Page 15 Record product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Replacement parts are not available for this item. Refer to UPC 193175465269. Item 56401 Page 15 For technical questions, please call 1-888-866-5797.

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

This manual is also suitable for:

56401