Download
Share
Print this page
Bauer 1966E-B Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Grinder
  5. 1966E-B
  6. Owner's manual & safety instructions

Bauer 1966E-B Owner's Manual & Safety Instructions

4-1/2" paddle switch angle grinder
Hide thumbs Also See for 1966E-B:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21i

Advertisement

loading

Related Manuals for Bauer 1966E-B

Summary of Contents for Bauer 1966E-B

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Table of Contents Safety ............2 Maintenance ..........16 Specifications ..........11 Parts List and Diagram ......18 Setup ............11 Warranty ............ 20 Operation ........... 13 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

  • Page 3: Safety

    Electrical Safety 1. Power tool plugs must match the outlet. 4. Do not abuse the cord. Never use the cord Never modify the plug in any way. for carrying, pulling or unplugging the power Do not use any adapter plugs with grounded tool.
  • Page 4 Power Tool Use and Care 1. Do not force the power tool. 5. Maintain power tools. Check for misalignment Use the correct power tool for your application. or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
  • Page 5 Safety Warnings Common for Grinding, Sanding, or Wire Brushing Operations 1. This power tool is intended to function as a grinder, sander, or wire brush. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may intensity noise may cause hearing loss.
  • Page 6 20. Do not leave the tool unattended when it is plugged • Avoid operating alone. into an electrical outlet. Turn off the tool, and • Do not use with power switch locked on. unplug it from its electrical outlet before leaving. •...
  • Page 7 Safety Warnings Specific for Grinding and Abrasive Cutting-off Operations 1. Use only wheel types that are recommended 4. Always use undamaged wheel flanges for your power tool and the specific that are of correct size and shape for your guard designed for the selected wheel. selected wheel.
  • Page 8 Vibration Safety This tool vibrates during use. Repeated or 2. Do not smoke during use. Nicotine reduces long-term exposure to vibration may cause the blood supply to the hands and fingers, temporary or permanent physical injury, increasing the risk of vibration-related injury. particularly to the hands, arms and shoulders.
  • Page 9 Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
  • Page 10 Extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 11: Specifications

    Specifications Electrical Rating 120VAC / 60Hz / 8A No Load Speed 11,500/min Arbor Size 5/8" - 11 UNC Wheel Diameter 4-1/2" (115mm) Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Paddle Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 12 Installing the Auxiliary Handle TO PREVENT SERIOUS INJURY: Do not operate this tool with one hand only or without the Auxiliary Handle properly installed. 1. The Auxiliary Handle may be installed on either side of the Gear Housing. 2. Screw the threaded end of the Auxiliary Handle into the selected position.
  • Page 13 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Paddle Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 14 Workpiece and Work Area Set Up 1. Designate a work area that is clean and well-lit. 4. There must not be hazardous objects, such The work area must not allow access by children as utility lines or foreign objects, nearby that or pets to prevent distraction and injury.
  • Page 15 Grinding, and Wire Brushing Instructions TO PREVENT SERIOUS INJURY: Grip the tool firmly in both hands. 1. Make sure that the Paddle Switch is in 4. Allow the tool to come up to full speed the off-position, then plug in the tool. before touching the work material.

  • Page 16: Maintenance

    Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Paddle Switch is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
  • Page 17 Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.

  • Page 18: Parts List And Diagram

    Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 19 Assembly Diagram Item 57002 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

1864e-b