3.2
Dimensions
Values in mm (inch)
Enclosure
EU format
3.3
Electrical Connection
For connecting the power supply and the outputs, the HTS201 features push-in spring terminals for max. 1.5 mm
(AWG 16). The cables are fed into the enclosure via the rear side.
WARNING
Incorrect installation, wiring or power supply may cause overheating and therefore personal injuries or
damage to property.
For correct cabling of the device, always observe the presented wiring diagram for the product version used.
The manufacturer cannot be held responsible for personal injuries or damage to property as a result of
incorrect handling, installation, wiring, power supply and maintenance of the device.
HTS201 voltage output
85 (3.35)
40 (1.57)
Optional display
Enclosure
US format
23
(0.91)
Connection scheme
User Manual HTS201
85 (3.35)
40 (1.57)
Optional display
30 / 1.18
15 - 35 V DC
24 V AC ±20 %
15 - 35 V DC
Humidity and Temperature Room Sensor | 7
23
(0.91)
4
0.16
5
0.20
2