Using The Programmed Buttons; Lock Function; Beep Function - Kenwood TS-870S Instruction Manual

17
ASSIGNING FUNCTIONS
1 Press [MENU].
No function assigned
See "MENU
CONFIGURATION"
ENTER
TF-SET
1MHz
FINE
VOICE
USING THE PROGRAMMED BUTTONS
Press one of the buttons labeled ENTER, TF-SET,
MHz, or FINE.
+ The assigned function activates.
Note: After a Partial or Full Reset, the settings of the PF keys are
reset to default values.
LOCK FUNCTION
The Lock function disables some buttons to prevent you
from accidentally activating a function or disturbing
current settings.
Press [F.LOCK] to toggle the Lock function ON or OFF.
+ "FLOCK" lights when the Lock function is ON.
cant = ace auto
64
Note: Even after Lock has been activated, you can still use the
Tuning control with [TF-SET] to change your transmit frequency
when operating split frequency.
BEEP FUNCTION
The purpose of the Beep function is to provide an
audible signal that conveys information, There are two
types of signais:
* To confirm that a button has been pressed
» To report an error condition
The volume of the beep output can be selected via
Menu No. 38 (BP LV). If you prefer not to hear any
beeps, the function can be silenced via Menu No. 35
(BEEP}. The following paragraphs explain more about
each type of signal.