Kenwood TS-870S Instruction Manual page 23

3 GETTING ACQUAINTED
TANT= VOX FULL SEM AIP AGC AUTO PROC MON MENU | SLT | TONE | NB CTRL
RIT XT WIDTH SHIFT —
5! MENU
Lights while Menu mode is being accessed. Flashes
when the Menu has been temporarily reset {page 24}.
1 WB
"A" lights while Menu Ais being accessed. "B" lights
while Menu B is being accessed {page 24}.
at SPLIT
Lights while a different transmit and receive frequency
are selected for split frequency {page 42}.
48 RIT
Lights while the Receive Incremental Tuning function is
ON {page 44}.
aS TONE
In FM made, lights while the subaudible Tone function is
ON while operating split frequency {page 39}.
@ XIT
Lights while the Transmit Incremental Tuning function is
ON {page 45}.
@) NB
Lights while the Noise Blanker is ON {page 53}.
@ WIDTH
In ali modes except SSB and AM, lights after the
LO/WIDTH control is adjusted. Indicates that the
number reported below it on the Display is the receive
bandwidth {page 52}.
@ CTRL
Lights while data is being exchanged between a
computer and the transceiver during computer control
{page 50} or between two transceivers during Quick
Data Transfer {page 65}.
@ SHIFT
In CW, lights after the HVSHIFT control is adjusted.
indicates that the number reported below it on the
Display is the shift of the receive pass band {page 51}.
S a8
Shows the selected memory channel {page 55},
Menu No.{page 24}, and Automatic Mode boundary
numbers {page 48}. The dot lights while a memory
channel is locked out. This indicates that the channet
will be skipped during Memory Scan {page 62}.
@6 AUTO
Lights while Automatic Mode is ON {page 48}.
Automatic Mode automatically controls the operating
mode according to instructions that you provide.
@ 3888888
Shows the operating frequency to a resolution of 10 Hz
{page 20}. Also shows the Menu selections while in
Menu mode {page 24}.
@ LSB
Lights while in the Lower Sideband operating mode
{page 20}.
@ USB
Lights while in the Upper Sideband operating mode
{page 20}.
& cw
Lights while in the CW operating mode {page 20}.
& R
Lights while the Reverse function is used with FSK or
CW. The Reverse function reverses the mark and
space frequency relationship for FSK {page 20}, and
uses the opposite sideband for CW {page 20}.
W7