Advertisement
PC-W 150 B/E/G/GI
8
@ Headphone Board
Remove two screws (4) from rear cabinet.
M@ Receiver Board
(1) Remove two screws 6) retaining the shield plate (A) :
(2) Take off four connectors (3 PIN: CN301 and CN302,
7 PIN: CN303, 2 PIN: CN305) from the receiver board.
(3) Take off the antenna wire from indicated TP1 on the
receiver board.
(4) Remove three screws 6) @® retaining the speaker ter-
minal and PIN Jack from the rear cabinet.
{5) Remove the screw
retaining the receiver board
Sport bracket from Mechanism
B.
(6) Remove the receiver board.
(No. 1785)
(1)
(2)
(3)
(4)
(5)
Receive Board
Tuner Chassis (©)
Release the joining section
retaining the LED board
from the tuner chassis
Take off the LED board.
Remove the screw @) retaining the tuner gear ©
from the receiver board.
Take off the tuner gear
Remove three screws (0) retaining the tuner chassis
Advertisement
